Glass material :0.33 high alumina silicon glass
AB adhesive material: 0.33 Korean anti-peeping optical adhesive
Oil-phobic and hydrophobic nano-coating on surface: PPG, USA
Total thickness: 0.66
What is toughened glass
Toughened glass (Temperedglass/Reinforcedglass) belongs to the safety glass. Glass has considerable wear resistance and is very hard, with a Vickers hardness of 622 to 701. TOUGHENED glass is a kind of prestressed glass, in order to improve the strength of glass, usually use chemical or physical methods, forming compressive stress on the surface of glass, glass bear external force first offset surface stress, thereby improving the bearing capacity of glass, enhance its resistance to wind pressure, cold and heat, impact sex. The toughened glass protective film is a higher level of security protection for the mobile phone screen.
The toughened glass protective film is designed to prevent the mobile phone from falling and breaking the screen and prevent the screen from scratching. The reason why we choose toughened screen is: high hardness, low toughness, mobile phone fell, can be very good anti-broken screen. When the phone falls to the ground, it takes a lot of impact and breaks when the strain is too large. The toughness of the tempered film is low. When the tension of the phone comes out, the film will bear the tension, which greatly reduces the tension of the main screen.
How to identify the toughened glass protective film is good or bad:
1. The residual air bubble phenomenon on the surface of the mobile phone is not good;
2. toughened glass around the edges and corners can not stick, bubble phenomenon;
3. Toughened glass does not stick to mobile phone and is easy to fall off;
4. Toughened glass is too thick, affecting the light transmittance, and thickening the thickness of the phone;
5. The adhesive paste of toughened glass is too thick, which affects the light transmittance of mobile phone display;
6. After the toughened glass is pasted on the mobile phone, the surface of the mobile phone has watermark phenomenon.
7 toughened glass film is also divided into straight edge and arc edge, arc edge relative to the hypotenuse more mellow, not easy to hurt hands
8. The drop Angle is less than 110 degrees.
How to use the screen protector?
1.Cleaing the screen as follows.
(1）blowing off the dust first.
(2)Using the soft brush to brush off the visible dust.
(3)Using the cleaning cloth to Remove the invisible dust, clean the screen from left to right 3 times.
2.Start to stick
(1)Peel of the first protection layer.
(2)sticking the film on the screen slowly.
(3)Using the credit card or hard card push on the screen lightly to ensure bubble free,once you see any bubbles, peel it and stick again.
(4)after stick the screen protector well, peel of the second protection layer.
wholesale iPhone 12 Pro Max Protector manufacturer,wholesaler,supplier,factory,exporter for sale
Many mobile phone fans have the trouble in selecting mobile phone protector as there are so many different types of protectors sold on the market with various functions such as anti scratch protector, privacy protector and anti blue protector. In order to help readers to pick a right mobile phone protector, we will list out the different types of mobile phone protector and make a detail introduction about these protectors.
Anti-scratch protector with high permeability for iPhone 12 Pro Max
As we all known, applying a film on your mobile phone will influence the clearness of the screen. So there are some people who don’t want to apply a mobile phone protector at the expense of clearness. But anti-scratch protector with high permeability can not only provide the entire protect for your iphone 12 pro max but also provide you a total transparent screen. This protector are made of super wear resistant material with a high softness. Besides that it provides a good touching. It can effectively prevent flowers, spots, fingerprints, dust, from the outside of the maximum protection of your machine.
The frosted screen protector for iPhone 12 Pro Max
As its name implies, the surface is frosted texture, unique feel, giving users different operating experience. The advantage is effective resistance to fingerprint intrusion, convenient cleaning. The disadvantage is that the display has a slight effect. The surface layer is frosted, which effectively prevents the intrusion of fingerprints. Even if the traces of sweat and other liquid residues are left by fingers sliding, it can be cleaned up by gently wiping the hand, maximizing the visual effect of the screen.
Not all phone users like the smooth feel, with most opting for a frosted film for the "slightly resistant" feel, which is another operating experience. It would be a best choice for people who are easy to sweat in their hands.
The mirror protector for iPhone 12 Pro Max
When the backlight on the home screen goes out, the protective film acts as a mirror. When the backlight is on, text and images can be displayed normally through the film. The film is divided into 5~6 layers, one of which is treated by aluminum evaporation. This layer reflects external light to realize the function of a mirror.
The diamond protector for iPhone 12 Pro Max
The diamond protector is decorated like diamond, and the diamond effect sparkles under sunlight and light, without affecting the screen display. Diamond protector uses special silica gel to maintain high transparency, bubbles and exhaust velocity are not significant during use. Diamond protector feels better than scrub.
The privacy protector for iPhone 12 Pro Max
The privacy protector refers to a kind of protector designed based on physical optical polarizing technology. After applying the LCD screen, the screen only has visibility within 30 degrees of the front side and side surface, and the screen can be clearly seen from the front side, but nothing can be seen from the left and right side surface beyond 30 degrees.
Dongguan Aifou innovation Photoelectric Technology Co.,ltd was launched in year 2014, invest and set up factory in Jun, 2014. We specialized in tempered glass screen protector, tact switch, metal dome sheet, die cutting, connecting cable, membrane switch and so on. Products widely using in audio visual, communication, digital, video game, medical and household appliances and other field, and sell to Japan, Southeast Asia,Europe and America and other countries, own good credit in the whole industry. After over 10 years developing, now we are a diversified enterprise which integrated R&D, sale and production together. We bring in advance skill and equipments, using modern enterprise management system, focus on training to improve literacy, technology to improve quality, environmental protection as social duty, all production skill and products was ruled by ROHS. We take zero-defect as our ultimate goal, and we was audited by ISO 9001 /ISO 14001/ BSCI / GSV quality and environment management system.We can easily fill your large order. The small MOQ is very friendly to Amazon sellers and cross-border platforms such as AliExpress, and we will also provide labeling services.
1if you have complaint about your product or service.Please kindly write down your com- plaint with all details and send to us We will reply to you in 24 hours.
lf you wanna know more information,please kindly contact our salesman.
Packaging & Shipping
Focuses standard export carton or OEM Customized packing.
1. DHL / UPS / FedEx / TNT , Door-to-Door.
2. Sea Freight or Air Freight options, More Logistics Channel Service;
3. Customer Specified Forwarders or Negotiable Shipping Methods.
We use the best and safe packaging material to make sure your orders won’t be damaged during the delivery.
1)If you need order specially requested (like packaging, add logo,or different accessory part), or more quantity, Please be noted that the price in our website is merely the reference price and the actual one is subject to our final confirmation!
2)Any problem, requirement and suggestion, please contact us freely, we'd be very pleased to be at your side.
1.Are your samples free or need cost?
For inventory products, we will provide free sample, but need freight collect. For custom samples samples, it need sample cost and freight collect. But we will refund the sample cost after the order is made.
2.Can you do the designs for us?
Yes. We have a professional team with full experience in design and manufacturing. We can manufacture or copy the products depend on your requirements.
3.Could I use my own LOGO or design on goods?
Yes.we can put your logo on the products, labels or hangtags.We can also design and customize the packaging you need and attach your brand name for you.
4.About the MOQ?
For our inventory products, there is MOQ 100 PCS OK. If you are a professional purchaser or engaged in the sale of tempered protective film, we can provide a small quantity and full model service.
5.What Is Your Payment Terms?
Usually We Support T/T.
T/T 50% In Advance, The Balance 50% Will Be Paid At The Sight Of Copy B/L.
6.What Is The Delivery Time?
15-20 Days After The Advance Deposit And Sample Confirmed, To be Negotiated According To The Final Quantity.
7.How Do You Package Goods?
Poly Bag(PE/OPP)For one bag, Then Carton With A Certain Quantity.