Glass material: 0.33 high alumina silica glass
AB glue material: 0.33 Korea anti-peep optical glue
Surface oleophobic Hydrophobic Nano Coating: American PPG
Total thickness: 0.66
iPhone 12 mini anti-peep tempered protective film raw materials use high aluminum silicon 0.33 thickness glass 0.33 thickness ab glue to fit 2.5d large arc effect high sense of multiplier drop ball height test is 64g steel ball 60cm test 3 times without breaking surface electroplating oleophobic hydrophobic antibacterial nano coating Layer initial water drop glue 115 degrees after 3000 friction tests, water drop glue 105 degrees lamination, one-time venting, repeatable lamination.
What is toughened glass
Toughened glass (Temperedglass/Reinforcedglass) belongs to the safety glass. Glass has considerable wear resistance and is very hard, with a Vickers hardness of 622 to 701. TOUGHENED glass is a kind of prestressed glass, in order to improve the strength of glass, usually use chemical or physical methods, forming compressive stress on the surface of glass, glass bear external force first offset surface stress, thereby improving the bearing capacity of glass, enhance its resistance to wind pressure, cold and heat, impact sex. The toughened glass protective film is a higher level of security protection for the mobile phone screen.
The toughened glass protective film is designed to prevent the mobile phone from falling and breaking the screen and prevent the screen from scratching. The reason why we choose toughened screen is: high hardness, low toughness, mobile phone fell, can be very good anti-broken screen. When the phone falls to the ground, it takes a lot of impact and breaks when the strain is too large. The toughness of the tempered film is low. When the tension of the phone comes out, the film will bear the tension, which greatly reduces the tension of the main screen.
How to identify the toughened glass protective film is good or bad:
1. The residual air bubble phenomenon on the surface of the mobile phone is not good;
2. toughened glass around the edges and corners can not stick, bubble phenomenon;
3. Toughened glass does not stick to mobile phone and is easy to fall off;
4. Toughened glass is too thick, affecting the light transmittance, and thickening the thickness of the phone;
5. The adhesive paste of toughened glass is too thick, which affects the light transmittance of mobile phone display;
6. After the toughened glass is pasted on the mobile phone, the surface of the mobile phone has watermark phenomenon.
7 toughened glass film is also divided into straight edge and arc edge, arc edge relative to the hypotenuse more mellow, not easy to hurt hands
8. The drop Angle is less than 110 degrees.
How to use the screen protector?
1.Cleaing the screen as follows.
(1）blowing off the dust first.
(2)Using the soft brush to brush off the visible dust.
(3)Using the cleaning cloth to Remove the invisible dust, clean the screen from left to right 3 times.
2.Start to stick
(1)Peel of the first protection layer.
(2)sticking the film on the screen slowly.
(3)Using the credit card or hard card push on the screen lightly to ensure bubble free,once you see any bubbles, peel it and stick again.
(4)after stick the screen protector well, peel of the second protection layer.
wholesale iPhone 12 mini Protector manufacturer,wholesaler,supplier,factory,exporter for sale
It would be a sad tale if you loosed your phone mistakenly and afterwards it rolled over the ground. Your phone will probably go on strike. However if you have applied a protector on the surface of your iPhone 12 mini, the result would be absolutely different. It is still necessary to spring for a protector for your electronic devices.
The hassle of anti scratch protector
Although the cellphone protector shields the cellphone, it also minimizes the clarity of the screen, which might bring dizziness, lightheadedness, blurred vision and also other troubles to the "proprietor", which must be treated with care. However, the advantages of sticking protector are additionally obvious. Cover the screen with a protective layer. Even if you experience sand, which is a substance with strong firmness, the scrapes are also on the sticking protector, so it is a big deal to change another one. As well as when you transform your smart phone, you can offer it at a good cost by going to the pre-owned trading market. This benefit is in fact greater than the slight drawback of hurting eyesight.
Types of smart phone protector
At present, there are primarily two sort of cellphone protector on the marketplace: family pet material and also tempered glass product. PET product is one of the most typical product protector out there presently. PET is a copolymer of polyester, which has the qualities of high solidity, high transparency as well as high temperature resistance. The glue surface area can be filled with adhesive or fixed electricity, and so on. It has excellent light transmission and can be repeatedly pasted after being detached. The protector will not leave recurring adhesive and also will certainly not have bubbles. Presently, there are frozen protectors as well as high-def protectors on the marketplace.
The shortage of plastic protector
The disadvantage of plastic protector is that it is simple to scratch, so it is not suggested to stick plastic protector The plastic protectors discussed here consist of high-definition protector (finger print enthusiast), frosted protector (which seriously influences light passage), mirror protector (whose reflectivity is too expensive), ruby protector (which can not be reviewed) and also anti-peep protector (why smart phone manufacturers pursue aesthetic angle), however the greatest disadvantage is that the hardness is inadequate, things that can scrape them can be seen all over, as well as tricks can scratch plastic protectors.
The advantage of anti scratch protector
Therefore, it is best to choose high-quality tempered glass protector, due to the fact that it is as scratch-resistant as the cellphone display itself, and also its texture as well as transmittance are better. Toughened glass protector, compared to basic plastic, can play a far better anti-scratch duty, as well as the anti-fingerprint and also oil discolor impact is likewise better. Furthermore, due to its high firmness, even if the mobile phone falls, it can play a buffering function to a particular level and stop the display of the cellphone from being damaged. Unbreakable glass protector usually contains 4 layers, the very first layer is a special layer; The second layer is tempered glass; The third layer is explosion-proof protector; The fourth layer is silica gel finish.
The glass protective protector has the function of anti-collision, which is in fact the "whipping boy" of the touch screen of the cellphone. When coming across an influence, it can take in the influence, compromise the ego and secure the smart phone screen. Glass safety sticker labels constructed from great materials can actually play the function of "whipping boy", shield the touch screen of smart phones, as well as avoid the price of changing the harmed display at great expenditure, which does have certain effects. However, if you get a protective protector with bad product, it is still simply intimate.
If you are looking for a protector for iPhone 12 mini supplier, please spend a couple of minutes seeing our website. AIFOU is an expert protector manufacturer, providing several sort of display protectors such as tempered glass display protector, blue light filter and also privacy filter screen protector for iPhone 12 mini. If you are searching for a reliable screen protector dealer, please feel free to call us.
Dongguan Aifou innovation Photoelectric Technology Co.,ltd was launched in year 2014, invest and set up factory in Jun, 2014. We specialized in tempered glass screen protector, tact switch, metal dome sheet, die cutting, connecting cable, membrane switch and so on. Products widely using in audio visual, communication, digital, video game, medical and household appliances and other field, and sell to Japan, Southeast Asia,Europe and America and other countries, own good credit in the whole industry. After over 10 years developing, now we are a diversified enterprise which integrated R&D, sale and production together. We bring in advance skill and equipments, using modern enterprise management system, focus on training to improve literacy, technology to improve quality, environmental protection as social duty, all production skill and products was ruled by ROHS. We take zero-defect as our ultimate goal, and we was audited by ISO 9001 /ISO 14001/ BSCI / GSV quality and environment management system.We can easily fill your large order. The small MOQ is very friendly to Amazon sellers and cross-border platforms such as AliExpress, and we will also provide labeling services.
1if you have complaint about your product or service.Please kindly write down your com- plaint with all details and send to us We will reply to you in 24 hours.
lf you wanna know more information,please kindly contact our salesman.
Packaging & Shipping
Focuses standard export carton or OEM Customized packing.
1. DHL / UPS / FedEx / TNT , Door-to-Door.
2. Sea Freight or Air Freight options, More Logistics Channel Service;
3. Customer Specified Forwarders or Negotiable Shipping Methods.
We use the best and safe packaging material to make sure your orders won’t be damaged during the delivery.
1)If you need order specially requested (like packaging, add logo,or different accessory part), or more quantity, Please be noted that the price in our website is merely the reference price and the actual one is subject to our final confirmation!
2)Any problem, requirement and suggestion, please contact us freely, we'd be very pleased to be at your side.
1.Are your samples free or need cost?
For inventory products, we will provide free sample, but need freight collect. For custom samples samples, it need sample cost and freight collect. But we will refund the sample cost after the order is made.
2.Can you do the designs for us?
Yes. We have a professional team with full experience in design and manufacturing. We can manufacture or copy the products depend on your requirements.
3.Could I use my own LOGO or design on goods?
Yes.we can put your logo on the products, labels or hangtags.We can also design and customize the packaging you need and attach your brand name for you.
4.About the MOQ?
For our inventory products, there is MOQ 100 PCS OK. If you are a professional purchaser or engaged in the sale of tempered protective film, we can provide a small quantity and full model service.
5.What Is Your Payment Terms?
Usually We Support T/T.
T/T 50% In Advance, The Balance 50% Will Be Paid At The Sight Of Copy B/L.
6.What Is The Delivery Time?
15-20 Days After The Advance Deposit And Sample Confirmed, To be Negotiated According To The Final Quantity.
7.How Do You Package Goods?
Poly Bag(PE/OPP)For one bag, Then Carton With A Certain Quantity.