Advanced Strength, Edge-to-Edge Protection for next gen. Apple iPhone for iPhone 8 Plus/7 Plus/ 6s Plus/ 6 Plus
$ 0.80 ~ $ 1.00/piece
(Min. Order)
Quick Details
Product Code:
Place of Origin:
Supply Ability:
250000 piece per week
Quick Details
  • Color
Shipping fee
Shipping fee
Inquiry Basket
Contact Supplier

iPhone 8 Plus, iPhone 7 Plus, iPhone 6s Plus, iPhone 6 Plus screen printing full screen protection tempered protective film
Glass material: 0.33 high alumina silica glass
AB glue material: 0.25 Korean optical glue
Surface oleophobic, hydrophobic nano antibacterial coating: PPG, USA
Total thickness: 0.58


Product Description

iPhone 8 Plus, iPhone 7 Plus, iPhone 6s Plus, iPhone 6 Plus screen printing full screen protection tempered protective film raw materials use high aluminum silicon 0.33 thickness glass 0.25 thickness ab glue to fit 2.5d large arc effect screen printing full screen coverage protection stronger and more advanced sense Falling ball height test is 64g steel ball 60cm test 3 times without breaking the surface electroplating oleophobic hydrophobic antibacterial nano-coating initial water drop glue 115 degrees after 3000 friction tests.

Advanced Strength, Edge-to-Edge Protection for next gen. Apple iPhone for iPhone 8 Plus/7 Plus/ 6s Plus/ 6 Plus

What is toughened glass
Toughened glass (Temperedglass/Reinforcedglass) belongs to the safety glass. Glass has considerable wear resistance and is very hard, with a Vickers hardness of 622 to 701. TOUGHENED glass is a kind of prestressed glass, in order to improve the strength of glass, usually use chemical or physical methods, forming compressive stress on the surface of glass, glass bear external force first offset surface stress, thereby improving the bearing capacity of glass, enhance its resistance to wind pressure, cold and heat, impact sex. The toughened glass protective film is a higher level of security protection for the mobile phone screen.
The toughened glass protective film is designed to prevent the mobile phone from falling and breaking the screen and prevent the screen from scratching. The reason why we choose toughened screen is: high hardness, low toughness, mobile phone fell, can be very good anti-broken screen. When the phone falls to the ground, it takes a lot of impact and breaks when the strain is too large. The toughness of the tempered film is low. When the tension of the phone comes out, the film will bear the tension, which greatly reduces the tension of the main screen.

How to identify the toughened glass protective film is good or bad:
1. The residual air bubble phenomenon on the surface of the mobile phone is not good;
2. toughened glass around the edges and corners can not stick, bubble phenomenon;
3. Toughened glass does not stick to mobile phone and is easy to fall off;
4. Toughened glass is too thick, affecting the light transmittance, and thickening the thickness of the phone;
5. The adhesive paste of toughened glass is too thick, which affects the light transmittance of mobile phone display;
6. After the toughened glass is pasted on the mobile phone, the surface of the mobile phone has watermark phenomenon.
7 toughened glass film is also divided into straight edge and arc edge, arc edge relative to the hypotenuse more mellow, not easy to hurt hands
8. The drop Angle is less than 110 degrees.


How to use the screen protector?
1.Cleaing the screen as follows.
(1)blowing off the dust first.
(2)Using the soft brush to brush off the visible dust.
(3)Using the cleaning cloth to Remove the invisible dust, clean the screen from left to right 3 times.
2.Start to stick
(1)Peel of the first protection layer.
(2)sticking the film on the screen slowly.
(3)Using the credit card or hard card push on the screen lightly to ensure bubble free,once you see any bubbles, peel it and stick again.
(4)after stick the screen protector well, peel of the second protection layer.


wholesale iPhone 7 Plus Protector manufacturer,wholesaler,supplier,factory,exporter for sale


If you want to invest in a iPhone 7 Protector, the below factors you must consider:


The oleophobic coating is the most important indicator of the quality of the mobile phone film. The oleophobic coating can remove fingerprint residues, make the screen cleaner, smoother, and improve the hand feel. Generally, you can feel the quality of the oleophobic coating through the curvature of the water droplets. The condensation of water droplets on the phone film is similar to the condensation effect of raindrops on the lotus leaf. The rounder the curvature of the water droplets, the better the oleophobic coating. In addition, you can tilt the phone screen to allow water droplets to slide on the phone film. The smaller the tilt angle, the better the oleophobic coating. After the water droplets slide, the less obvious the impression, the better the oleophobic layer. After sticking the film for a period of time, if it is found that the oleophobic coating is gone (the effect of no water droplets, or the oily pen is not easy to wipe clean during the test), it is recommended to replace the tempered film.


Thickness: Of course, the thinner the tempered film, the better the experience, but while the thin film brings a good feel, it also increases the risk. The thin film has a worse pressure capacity and is easier to break, which will cause failure when falling. Therefore, it is generally unnecessary to pursue ultra-thin, medium thickness such as 0.3-0.5mm.


Edge processing: 2.5D, 3D, 6D, 9D various parameters make people feel unpredictable, very unfathomable, in fact, there are two types of edge processing, one is flat film, the edge does not do any cutting processing, right angle, the disadvantage of the film is the diaphragm, which is not recommended. Another is that the edge is cut, which is the various D advertised by the business, which turns the right angle into an arc, and the mobile phone film and the screen fit more closely, and the edge cannot be felt.


Light transmittance: The better the light transmittance, the higher the color reproduction. A good film generally has a light transmittance of more than 95%. It is recommended to choose a mobile phone film with a light transmittance of more than 90%.


Full screen and non-full screen: The full screen can better protect the screen, but it needs to be matched with the phone case. If the phone case contains too much, or the position of the phone film is not good enough, it may cause the top film, so the full screen needs to be compatible, the filming artifacts are matched, and the film can be applied more accurately. The non-full screen is certainly more convenient, but when used with the phone case, dust will accumulate on the edges of the phone case and the phone film, which will affect the experience.


Hardness: At present, the mainstream mobile phone film has a hardness above 9H, which is roughly equivalent to a Mohs hardness of 6-7. It can cope with metal scratches, but cannot cope with sand and gravel. As long as the use environment is not too harsh, the mainstream mobile phone film hardness is all enough.


Although there are many indicators, we can focus on the most important oleophobic coating and thinness. These two indicators, one affects the feel, the other affects the drop resistance, and the other indicators are free to choose according to personal needs.



Company Profile
Dongguan Aifou innovation Photoelectric Technology Co.,ltd was launched in year 2014, invest and set up factory in Jun, 2014. We specialized in tempered glass screen protector, tact switch, metal dome sheet, die cutting, connecting cable, membrane switch and so on. Products widely using in audio visual, communication, digital, video game, medical and household appliances and other field, and sell to Japan, Southeast Asia,Europe and America and other countries, own good credit in the whole industry. After over 10 years developing, now we are a diversified enterprise which integrated R&D, sale and production together. We bring in advance skill and equipments, using modern enterprise management system, focus on training to improve literacy, technology to improve quality, environmental protection as social duty, all production skill and products was ruled by ROHS. We take zero-defect as our ultimate goal, and we was audited by ISO 9001 /ISO 14001/ BSCI / GSV quality and environment management system.We can easily fill your large order. The small MOQ is very friendly to Amazon sellers and cross-border platforms such as AliExpress, and we will also provide labeling services.

Anti-glare Treatments That Protect Your Screen Protector*for 10.2-inch iPad

1if you have complaint about your product or service.Please kindly write down your com- plaint with all details and send to us We will reply to you in 24 hours.
lf you wanna know more information,please kindly contact our salesman.


Packaging & Shipping
Focuses standard export carton or OEM Customized packing.
About Shipping:
1. DHL / UPS / FedEx / TNT , Door-to-Door.
2. Sea Freight or Air Freight options, More Logistics Channel Service;
3. Customer Specified Forwarders or Negotiable Shipping Methods.
We use the best and safe packaging material to make sure your orders won’t be damaged during the delivery.

Packaging & Shipping.png

Buyer Reading
1)If you need order specially requested (like packaging, add logo,or different accessory part), or more quantity, Please be noted that the price in our website is merely the reference price and the actual one is subject to our final confirmation!

2)Any problem, requirement and suggestion, please contact us freely, we'd be very pleased to be at your side.

1.Are your samples free or need cost?
For inventory products, we will provide free sample, but need freight collect. For custom samples samples, it need sample cost and freight collect. But we will refund the sample cost after the order is made.

2.Can you do the designs for us?
Yes. We have a professional team with full experience in design and manufacturing. We can manufacture or copy the products depend on your requirements.
3.Could I use my own LOGO or design on goods?
Yes.we can put your logo on the products, labels or hangtags.We can also design and customize the packaging you need and attach your brand name for you.

4.About the MOQ?
 For our inventory products, there is MOQ 100 PCS OK. If you are a professional purchaser or engaged in the sale of tempered protective film, we can provide a small quantity and full model service.

5.What Is Your Payment Terms?
Usually We Support T/T.
T/T 50% In Advance, The Balance 50% Will Be Paid At The Sight Of Copy B/L.

6.What Is The Delivery Time?
15-20 Days After The Advance Deposit And Sample Confirmed, To be Negotiated According To The Final Quantity.

7.How Do You Package Goods?
Poly Bag(PE/OPP)For one bag, Then Carton With A Certain Quantity.



Question & Answer